The software is freely distributed by XGecu and works with all modern Windows versions from . It features high‑speed USB communication (up to 17 MB/s or higher on compatible adapters), multi‑language support, and advanced capabilities such as batch programming, in‑circuit programming (ISP), automatic chip identification, bad block management for NAND devices, and one‑button cloning for eMMC/eMCP.

Immediately lift the ZIF lever and remove the chip. Check the chip orientation. Verify that no pins are bent or shorted together on your adapter board. "Pins Contact Detected Error" Cause: Dust, oxidation, or poor alignment on the IC legs.

Right-click on the XgproV1190_Setup.exe file and select . Follow the on-screen prompts, accept the license agreement, and choose your preferred installation directory. Step 3: Install USB Drivers

: If Windows blocks the driver installation, restart your PC in "Disable Driver Signature Enforcement" mode and re-run the driver setup.

Because Xgpro modifies system drivers, Windows may flag the installer. As long as you downloaded the file directly from XGecu, you can safely click "Run Anyway."

If Xgpro starts the operation but fails during programming, there could be several causes.