The Ultimate Guide to the ChipBLASTER JV10: Operation, Maintenance, and Troubleshooting
Route the bypass hose from the regulator valve back into the machine tool's coolant tank. Ensure this line discharges below the oil level to minimize foaming and mist generation. Electrical Integration and M-Code Interface chipblaster jv10 manual
If you are looking for manual details to verify installation or maintenance requirements, the JV10 generally follows these specs: Revelation Machinery Maximum Pressure: 1,500 PSIG (103.4 BAR) Coolant Volume: 10 GPM (37.8 LPM) Coolant Tank Capacity: 48 Gallons Electrical: 460V / 3 Phase / 60Hz Dimensions: 35″ Deep x 55″ Wide Critical Safety & Maintenance Warnings The Ultimate Guide to the ChipBLASTER JV10: Operation,
The is a legacy high-pressure, high-volume coolant delivery system manufactured by ChipBLASTER (an LNS Group company). It is engineered to optimize chip evacuation, reduce thermal shock, and increase cutting speeds during CNC milling and turning operations. This technical manual overview provides critical specifications, installation procedures, and operational guidelines required to safely maintain and run the unit. Technical Specifications It is engineered to optimize chip evacuation, reduce
Most Chipblaster units operate on nearly identical principles regarding filtration and maintenance.
Check that the CNC coolant tank is filled to the appropriate level.
Wire the M-code interface cables from the CNC control board to the ChipBLASTER terminal strip. This allows the CNC program to activate high-pressure mode automatically. 3. System Operation